f
Post Thumbnail

BS27 Clear Heat Sealable Polypropylene

  • Product Number: BS27 Clear Heat Sealable Polypropylene
  • Face Finish:
  • Film Mils: 1.1 mil
  • Adhesive Mils: 0.3 mil
  • Total Mils: 1.4 mil
  • Available by 60" Master (5K or longer): Yes
g
Download .PDF

BS27 Clear Heat Sealable Polypropylene

This one side heat sealable, adhesive coated film is designed specially for flexible packaging applications.Offering excellent oil and chemical resistance, product BS27 is ideal for use as a barrier layer within the packaging or as an overlaminate to protect print and graphics. Typical end use applications include: bakery, pet food and snack pouches. HFFS and VFFS machine capable.

BS27 CLEAR HEAT SEALABLE POLYPROPYLENE
Product Technical Information

Features and Applications
  • Pouch, HFFS and VFFS machine capable.
  • Ideal for snack food bags as a barrier or overlaminate.
  • One side heat sealable.
Physical Properties
Film

1.1 mil Clear Biaxially Oriented Polypropylene (BOPP) core
Adhesive

0.3 mil High Grade Direct Food Contact Clear Emulsion Acrylic
Typical Technical Values
Value Test Method
Film Elongation at Break

212% MD
60% TD

ASTM D882
Adhesion to Steel

11 oz/in 30 min conditioning
13 oz/in 24 hr conditioning

180º peel at 12 in/min
180º peel at 12 in/min
ASTM D3330/D3330M-04
Unwind Adhesion

5 oz/in 30 min conditioning

180˚ peel at 12 in/min
ASTM D3811/D3811M-96
Seal Strength

1800 grams/in

ASTM F88
20psi, 239ºF, 0.5sec
Probe width: 1in
Peeling Speed 12 in/min
Minimum Seal Temperature

221ºF Tested in laboratory conditions. Actual temperature dependent on machine type, type of crimpers, machine speed and in some case product being packaged. We do not provide a specific temperature to set equipment.
Yield (sq.in./lbs.)

21,500 in²/lb

ASTM D4321
Application Temperature Range

32ºF to 150ºF
Service Temperature Range

0ºF to 180ºF
Roll Tolerances
Roll Length

+/- 5%
Roll Width

+/- 0.0625 in (1/16th in)
Storage and Handling
  • Two years when stored at 70˚F and 50% relative humidity.
  • Rolls must be transported and stored on protected surfaces.
  • Use caution when placing or removing roll from mandrel.
Regulatory Compliance

RoHS, RoHS2, REACH, TSCA, Toy Safety Standard ASTM F963, CEPA, CONEG, FDA 21CFR175.105, 21CFR175.125, 21CFR177.1520. California Proposition 65