9108 Clear BOPP Carton Sealing Tape

Based on a tough biaxially-oriented polypropylene film, with high strength in the machine and cross directions, coated with a high grade emulsion acrylic system. 9108 offers excellent acid, chemical and oil resistance.

Construction
.001 Clear BOPP Film
High Energy Treatment
.0008 Emulsion Adhesive

Backing (mils)
1.0
 Biaxially-Oriented Polypropylene Film
     
Adhesive (mils)
.8
 13 lbs. / Ream Emulsion Acrylic
     
Total Thickness (mils)
1.8
 +/- 10% Tolerance
     
Performance    
Adhesion to steel (oz./in. of width)
19
 1 min. conditioning
(180) degree peel @ 12 sec./in. Dwell)
23
 30 min. conditioning
 
28
 24 hr. conditioning
Peel Adhesion to Corrugated (oz/in of width)
20
 1 min. conditioning (200# Test Paper)
(180 degree peel @ 12 sec./in/ Dwell)   Paper Tear all Test Samples
     
Un-wind Adhesion to steel (oz./in. of width)
20
 30 min. conditioning
(180 degree peel @ 12 sec./in. Dwell)
     
Adhesive Tensile Strength (oz./in. of width)
30
(Loop Tack)    
     
Elongation (% at break)
160
 MD
 
60
 TD
Temperature Range (degrees F)
 
Application
+32 to +150
  
Operating
-41 to +180
  
     
Roll Tolerances    
Roll Length
+/- 5% of roll length
  
 
 
Roll Width
+/- .0625 (1/16th)
  
     
Apperance: (particulate contamination)
0 to 5
 > 100 micron
(parts / msi)
5 to 15
 < 50 micron
 
10 to 25
 < 10 micron


While we believe them to be reliable, the statements and information herein are only for general guidance and are not warrants and guarantees for accuracy and completeness. Because of the variety of possible uses, THERE IS NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. THE BUYER SHOULD TEST THE SUITABILITY FOR EACH INTENDED USE BEFORE USING. acpo ltd WILL NOT BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF PRODUCTS OR FOR THE INCIDENTAL OR CONSEQUENTIAL DAMAGES. acpo ltd warrants the product(s) to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year of the initial date of shipment, acpo ltd shall, upon notification thereof and substantiation that the products have been stored and applied within acpo ltd's standards, correct such defects by suitable repair or replacement without charge at acpo ltd's plant or at the location of the products (at acpo ltd's election): provided, however, if acpo ltd determines that repair or replacement is not commercially practical, acpo ltd shall issue a credit in favor of the BUYER in an amount not to exceed the intial purchase price of the product from acpo ltd.
PDS-9108-Rev. A