691DIG Clear Medium Release Polyester Overlaminate

691DIG is based on a water clear polyester film specifically formulated to protect the underlying printed label by screening harmful UV rays. It is surface treated with a non-silicone release for smooth controlled unwind, and features a high grade emulsion acrylic adhesive system, specifically tested for adhesion to challenging digitally printed surfaces. 691DIG meets the highest standards of optical clarity, is demensionally stable and exhibits excellent resistance to moisture, chemicals, acids, alkali's, oil sunlight, weathering and aging. This product meets specification for indirect food contact, FDA file: 21 CFR 177.1630 and 21 CFR 175.

Construction
Light Release Coating
.00092 UV Resistance PET Film
.0005 Emulsion Adhesive

Backing (mils)
.92
 Biaxially Oriented Polyester Film
     
Adhesive (mils)
.5
 8 lbs. / Ream Emulsion Acrylic
     
Total Thickness (mils)
1.42
 +/- 10% Tolerance
     
Performance    
Peel Adhesion to steel (oz./in. of width)
18
 30 min. conditioning
(180) degree peel @ 12 sec./in. Dwell)
28
 24 hr. conditioning
Un-wind Adhesion to steel (oz./in. of width)
12
 30 min. conditioning
(180 degree peel @ 12 sec./in. Dwell)
     
Adhesive Tensile Strength (oz./1" x 1")
22
(Loop Tack)    
     
UV Absorbance (AU)
2.0 to 3.25
 Between 200 to 380 (nm)
     
Film Elongation (% at break)
115
MD
     
Haze (%)
.8
 
Film Shrinkage (%)
1.6
MD
30 min. @ 300F
.7
TD
     
Temperature Range (degrees F)
 
Application
+32 to +150
  
Operating
- 40 to +300
  
     
Roll Tolerances    
Roll Length
+/- 5% of roll length
  
 
 
Roll Width
+/- .0625 (1/16th)
  
     
Apperance: (particulate contamination)
0 to 5
 > 100 micron
(parts / msi)
5 to 15
 < 50 micron
 
10 to 25
 < 10 micron


While we believe them to be reliable, the statements and information herein are only for general guidance and are not warrants and guarantees for accuracy and completeness. Because of the variety of possible uses, THERE IS NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. THE BUYER SHOULD TEST THE SUITABILITY FOR EACH INTENDED USE BEFORE USING. acpo ltd WILL NOT BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF PRODUCTS OR FOR THE INCIDENTAL OR CONSEQUENTIAL DAMAGES. acpo ltd warrants the product(s) to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year of the initial date of shipment, acpo ltd shall, upon notification thereof and substantiation that the products have been stored and applied within acpo ltd's standards, correct such defects by suitable repair or replacement without charge at acpo ltd's plant or at the location of the products (at acpo ltd's election): provided, however, if acpo ltd determines that repair or replacement is not commercially practical, acpo ltd shall issue a credit in favor of the BUYER in an amount not to exceed the intial purchase price of the product from acpo ltd.
PDS-691DIG-Rev. A