Home > Products > Self-Wound Polypropylene > Thermal Transfer Printable Polypropylene > Product Data Sheet: 531T

531T Thermal Transfer Polypropylene Film 531T is a thermal transfer printable matte polypropylene film. Based on a tough biaxially-oriented polypropylene film, offering a low glare surface to facilitate electronic scanning. 531T has high strength in the machine and cross directions, coated with a high grade, water clear emulsion acrylic system. 531T offers excellent acid, chemical and oil resistance. "Testing should be done on your specific printer." This product meets specification for FDA files: 21 CFR 175.105 and 21CFR 177.1520. Construction Matte Surface - Thermal Transfer Print Receptive .001 Clear BOPP Film High Energy Treatment .0005 Emulsion Adhesive Backing (mils) 1.0 Biaxially-Oriented Matte Polypropylene Film (BOPP)       Adhesive (mils) .5 5 lbs. / Ream Emulsion Acrylic       Total Thickness (mils) 1.5 +/- 10% Tolerance       Performance     Adhesion to steel (oz./in. of width) 15 30 min. conditioning (180) degree peel @ 12 sec./in. Dwell) 18 24 hr. conditioning       Un-wind Adhesion to steel (oz./in. of width) 13 30 min. conditioning (180 degree peel @ 12 sec./in. Dwell)       Adhesive Tensile Strength (oz/in 1"x1") 15 (Loop Tack)           Elongation (% at break) 190 MD   70 TD       Temperature Range (degrees F)   Application +32 to +150   Operating 0 to +180         Roll Tolerances     Roll Length +/- 5% of roll length       Roll Width +/- .0625 (1/16th)         Appearance: (particulate contamination) 0 to 5 > 100 micron (parts / msi) 5 to 15 < 50 micron   10 to 25 < 10 micron

While we believe them to be reliable, the statements and information herein are only for general guidance and are not warrants and guarantees for accuracy and completeness. Because of the variety of possible uses, THERE IS NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. THE BUYER SHOULD TEST THE SUITABILITY FOR EACH INTENDED USE BEFORE USING. acpo ltd WILL NOT BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF PRODUCTS OR FOR THE INCIDENTAL OR CONSEQUENTIAL DAMAGES. acpo ltd warrants the product(s) to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year of the initial date of shipment, acpo ltd shall, upon notification thereof and substantiation that the products have been stored and applied within acpo ltd's standards, correct such defects by suitable repair or replacement without charge at acpo ltd's plant or at the location of the products (at acpo ltd's election): provided, however, if acpo ltd determines that repair or replacement is not commercially practical, acpo ltd shall issue a credit in favor of the BUYER in an amount not to exceed the intial purchase price of the product from acpo ltd.

PDS-531T-Rev. A